View NTE889M_1291364.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NTE889M Integrated Circuit Dual, Low Power, JFET OP Amplifier
Description: The NTE889M is a JFET-input operational amplifier in an 8-Lead DIP type package designed for low power applications and features high input impedance, low input bias current, and low input offset current. Advanced design techniques allow for higher slew rates, gain bandwidth products, and output swing. Features: D Low Supply Current: 200A/Amplifier D Low Input Bias Current: 5pA D High Gain Bandwidth: 2MHz D High Slew rate: 6V/s D High Input Impedance: 1012 D Large Output Voltage Swing: 14V D Output Short Circuit Protection Absolute Maximum Ratings: Supply Voltage (From VCC to VEE), VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +36V Input Differential Input Voltage (Note 1), VIDR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V Input Voltage Range (Note 1, Note 2), VIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V Output Short-Circuit Duration (Note 3), ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite Seconds Operating Junction Temperature (Note 3), TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +70C Storage Temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150C Storage temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -60 to +150C Note 1. Differential voltages are at the non-inverting input terminal with respect to the inverting input terminal. Note 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15V, whchever is less. Note 3. Power dissipation must be considered to ensure maximun junction temperature (TJ) is not exceeded.
DC Electrical Characteristics: (VCC = +15V, VEE = -15V unless otherwise specified)
Parameter Input Offset Voltage Symbol VIO aVIO IIO IIB VICR VOM AVD GBW ri CMRR PSRR PD ID CS SR tr OS
tS
Test Conditions VO = 0, RS = 50 TA = +25C TA = 0 to +70C
Min - - - - - - - - -11 10.0 10.0 3 3 - - 70 70 - - - 2 - - -
Typ 3 - 10 5 - 30 - +14.5 -12 14 - 58 - 2 1012 84 86 6.0 200 120 6 0.1 10 1.6
Max 15 20 - 200 5 200 10 +11 - - - - - - - - - 7.5 250 - - - - -
Unit mV mV V/C pA nA pA nA V V V V V/mV V/mV MHz dB dB mW A dB V/s s % s s
Temperature Coefficient of Input Offset Voltage Input Offset Current
VO = 0, RS = 50, TA = 0 to +70C VCM = 0, VO = 0 VCM = 0, VO = 0 TA = +25C TA = 0 to +70C RL = 10k, TA = +25C RL = 10k, TA = 0 to +70C VO = 10V, RL 10k f = 200kHz TA = +25C VCM = VICRmin, VO = 0, RS = 50, TA = +25C VCM = 0, VO = 0, RS = 50, TA = +25C No Load, VO = 0, TA = +25C No Load, VO = 0, TA = +25C f = 10kHz Vin = -10V to +10V, RL = 10k, CL = 100pF, AV = +1.0 Vin = 20mV, RL = 10k, CL = 100pF, AV = +1.0 VCC = +15V, VEE = -15V, AV = -1.0, RL = 10k, VO = 0 to 10V step to within 10mV TA = +25C TA = 0 to +70C TA = +25C TA = 0 to +70C TA = +25C TA = 0 to +70C
Input Bias Current
Common-Mode Input Voltage Range
Maximim Peak Output Voltage Swing
Large-Signal Differential Voltage Amplification Gain Bandwidth Product Input Resistance Common-Mode Rejection Ratio Supply Volatge Rejection Ratio Total Power Dissipation (Each Amp) Power Supply Current (Each Amp) Channel Separation Slew Rate Rise Time Overshoot Setting Time
to within 1.0mV
-
2.2
-
Equivalent Input Noise
en
RS = 100, f = 1kHz
-
47
-
nV/ Hz
Pin Connection Diagram
Output 1 1 Inverting Input 1 2 Non-Inverting Input 1 3 VCC (-) 4
8 VCC (+) 7 6 5 Output 2 Invert Input 2 Non-Invert Input 2
8
5
.260 (6.6)
1
4
.390 (9.9) Max .155 (3.93)
.300 (7.62)
.100 (2.54) .300 (7.62)
.145 (3.68)

▲Up To Search▲

Price & Availability of NTE889M

	To Download NTE889M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .